中文字幕日韩在线观看,久久久人人玩人妻精品综合,国产欧美日本在线,久久精品免费视频6,欧美精品黄色网站,色综合久久久久无码专区,亚洲区欧美中文字幕久久,国产手机在线视频,国产中文字幕视频在线观看,日本一区二区免费在线观看

Hotline:400-880-1556

English




IEC 60598-1: 2020 edition standard update instructions

Author:中認(rèn)聯(lián)科 time:2020-09-21 Ctr:2207

IEC 60598-1:2020 luminaires. Part 1 of general requirements and tests was officially released on August 17, 2020. IEC 60598-1:2020 is the ninth edition released this time and will replace IEC 60598-1:2014+A1 : The 2017 version.

image.png

Compared with the previous version, the new version includes the following major technical changes:

1. Add PELV and related requirements. Due to transient protection circuits and EMC reasons, the market has a strong demand for PELV circuits. Considering IEC TR 63139 (under development), where SELV appears in the standard, the addition of PELV related modifications involves Chapter 3, Chapter 4, Chapter 7, Chapter 8, Chapter 10, Appendix X, etc.;

2. Modified Table 10.3 and Article 3.3.19 for high protection currents. According to the regulations stated in the manual of 3.3.19, the power supply current limit of 20A or more shall be added on the basis of the original applicable objects, that is, the applicable objects of this clause are Permanently connected lamps with a power supply current of more than 20A and a protective conductor current of more than 10 mA, and the corresponding limit in Table 10.3 is changed from 10 mA to 10 mA or in accordance with the manufacturer’s instructions;

3. Article 3.3.26 adds the marking requirements for wall-mounted lamps within the reach of the arm, and requires additional instructions for fixing the cable to the wall;

4. Article 3.2.27 adds requirements for constant light output function and programmable current output;

5. Article 4.30 Non-user replaces the electric shock protection cover used for light source lamps;

6. Article 4.24.2 Blu-ray hazards delete category 0 hazards;

7. Article 5.2.16 adds the component standard IEC 61984 that the connector should comply with, as well as additional requirements such as polarity interchange, mechanical locking, protection against electric shock, short circuit protection, and cable clamping;

8. Article 3.3.25 adds the requirements of cable UV protection;

9. Article 4.34 requires lamps not to emit harmful electromagnetic fields and should comply with EMF IEC 62493;

10. Updated the functional grounding and protective grounding and their requirements in the 1.2.73 standard, including adding definitions, adding the qualifiers of "function" or "protection" to "grounding" in the clauses; in Appendix G, adding The description of the disconnection of the functional ground (if separate) when measuring the protective conductor current is added, and the functional ground terminal or contact that can be touched should be regarded as an accessible part and tested when measuring the contact current;

11. Article 4.35 puts forward the test requirements to prevent the fan blades driven by the motor for cooling in the lamps from being touched, and gives the exemption test conditions, such as low hardness, low speed and low power;

12. Article 3.2.2 Modify the marking requirements of rated voltage, delete the situation that does not need to be marked with rated voltage, that is, all lamps must be marked with rated voltage in volts;

13. In the provisions of Article 5.2.10, the provisions that meet the requirements of 5.2.10.4 can be used as an exception to the use of flexible cord holders. The additional 5.2.10.4 provides for exceptional conditions, including overcurrent protection devices. The highest short-circuit current reached does not exceed 2A, and the highest voltage of various Class III lamps, and the corresponding qualification test requirements;

14. The measurement network in Appendix G for the measurement of contact current and protective conductor current is revised;

15. Modified the contact voltage limit value of irregular DC voltage in 8.2.3c);

16. Article 1.2.96 Luminaires (PoE) that rely on Ethernet power supply that meets IEC 62368-3 power supply are connected, involving definitions, structures, thermal tests and an appendix introducing PoE luminaires;

17. Article 9 IP adds high pressure and high temperature water blowout protection IPX9 (80℃) and high pressure and low temperature water blowout protection IPX9 (15℃) and its test requirements;

18. Amended Appendix D to introduce alternative thermal tests for lamps whose ta mark is higher than 25℃;

19. In Article 0.2, 4.14.1 was added, and relevant requirements for rail-mounted luminaires were added, including definitions, and rail-mounted luminaires were added to 4.14.1 test objects, and a requirement was added in Chapter 4, that is, rail-mounted luminaires It shall be tested in accordance with IEC 60570 Annex A;

20. The test method of 10.2.2 to increase the electrical strength of DC lamps is modified;

21. Amended Appendix D and added the temperature limit to Table 12.1 and Table 12.3. For lamps marked with F, the covering layer is changed to directly contact the lamp instead of covering the outside of the box before;

22. The minimum torque of the metal gland test in Table 4.2 is reduced from 6.25 Nm to 4 Nm;

23. Amend the requirements for protective impedance devices (4.10.4) in Section 4.10.4 and Appendix U, and modify the quantity requirements of Y1 and Y2 to be expressed in tables, and according to the power supply voltage, impulse withstand category, and insulation of the jumper And the number of capacitors required by the capacitor type (Y1, Y2 or Y4). The relevant amendments involve Chapter 4 and Appendix U;

24. Amend the second paragraph of 5.2.14 to modify the category III plugs used in lamps and lanterns, in the original requirement that category III plugs cannot be connected to the grid power socket, "cannot be connected" is changed to "cannot be electrically connected", and The test method is added, and the relevant modification involves Chapter 5 and Chapter 4.


Related Articles
  • CCC certification points of large capacity charging box: battery, headphones can not be less

  • CCC certification of the earphone charging case: The rated capacity of the battery cell is less than 600mAh.

  • Attention! The latest standard of EU toy safety standard EN 71-3 has been released

  • Information Express | The European Union has issued a draft regulation on energy efficiency of external power adapters, which will be implemented in 2025

Follow Us
99re在线这里只有精品免费| 国产成人久久久精品二区三区| 国产最新网址| 大伊香蕉精品一区二区 | 无码专区久久综合久中文字幕| 99久久国产综合精品成人影院| 色翁荡息又大又硬又粗又视频图片 | 无码中文字幕日韩专区| 日韩人妻无码精品-专区| av天堂永久资源网| 国产色综合天天综合网| 中文字幕乱人伦高清视频| 国产精品无码永久免费888| 色综合久久久无码中文字幕波多| 国产精品亚洲欧美大片在线观看 | www国产无套内射com| 亚洲精品亚洲人成在线| 奇米影视7777久久精品| 乱人伦中文视频在线| 国产成人无码一区二区在线播放| 久久久综合香蕉尹人综合网| 夜夜添无码试看一区二区三区| 中文字幕亚洲综合久久| 亚洲av无码一区二区乱子伦as| 亚洲无码视频直播| 五月亚洲综合| 东京热亚洲色欲影院一区二区| 欧美韩日精品| 午夜福利在线播放| 亚洲2020天天堂在线观看| 韩国三级HD中文字幕不卡| 国产精品精华液网站| 久久人与动人物a级毛片| 免费av一区二区三区| 内射一区二区精品视频在线观看 | 国产在线观看无码免费视频| 人人妻在人人| 婷婷综合久久中文字幕蜜桃三电影| 亚洲国产欧美在线观看| 精品在线第一页| 国产精品日韩欧美|